HOME > ACCESORIES > YAMAHA 4 STROKE SPACER
Yamaha 4 Stroke Spacer Kit
 
LATHAM OUTBOARD 10" SPACER KITS are installed between the lower gear case and the mid section of your outboard motor. This converts a 30" motor to a 35" allowing the motor to be mounted higher on the transom, keeping the motor power head clear of any potential back splash. By removing the stock 5" spacer and installing the Latham 10" spacer kit, you can make the conversion without the need to stack spacers and performing costly shaft extensions. Spacer kits are available for the MERCURY VERADO® and the YAMAHA 4 STROKE® outboard motors and include the spacer, shaft, all the studs, nuts, water tube extension, shifter extension and the speedo extension hose and fitting.

 
 
KPLT-7959 YAMAHA 4 STROKE® 10" SPACER KIT
KPLT-7959 YAMAHA 4 STROKE® 10" SPACER KIT designed to lower the 225 and 250's propeller by 5" without double stacking stock spacers, allowing the transom bracket to be installed higher than normal. The spacer is installed between the mid section and the lower gear case and is easy to install as no machining is necessary. Each Kit includes the 10" spacer, drive shaft, water pickup extension coupler, the speedo extension hose and fitting, the shifter extension coupler and all fasteners.
 
 
 
 
KEXT-8164 YAMAHA® F350 5" EXTENSION KIT
YAMAHA® F350 5" EXTENSION KIT designed to lower the 30" F350 outboard propeller by 5", allowing the transom bracket to be installed higher than normal. A modified spacer is installed between the mid section and the stock 5" spacer, above the lower gear case, and is easy to install as no machining is necessary. Each Kit includes a modified 5" spacer, drive shaft, water pickup extension coupler, the pitot extension hose and fitting, the shifter extension coupler and all fasteners.
 
 
 
  Mercury Verado is a registered trademark of the Brunswick Corporation. Yamaha 4 STROKE is a registered trademark of the Yamaha Motor Corporation.  
 

 

 
I
I
© Latham Marine Inc.
I