HOME > NEW PRODUCTS

MERCURY VERADO® 10" SPACER KIT
Designed to lower the propeller by 5" without double stacking stock spacers, allowing the transom bracket to be installed higher than normal. The spacer is installed between the mid section and the lower gear case and is easy to install as no machining is necessary. Each Kit includes the 10" spacer, drive shaft, water pickup extension coupler, the pitot extension hose and fitting, the shifter extension coupler and all fasteners.

KPLT-7957     MERCURY VERADO® 10" SPACER KIT

YAMAHA® 4 STROKE 10" SPACER KIT
Designed to lower the 225 and 250's propeller by 5" without double stacking stock spacers, allowing the transom bracket to be installed higher than normal. The spacer is installed between the mid section and the lower gear case and is easy to install as no machining is necessary. Each Kit includes the 10" spacer, drive shaft, water pickup extension coupler, the pitot extension hose and fitting, the shifter extension coupler and all fasteners.

KPLT-7959     YAMAHA® 4 STROKE 10" SPACER KIT

YAMAHA® F350 5" EXTENSION KIT
Designed to lower the 30" F350 outboard propeller by 5", allowing the transom bracket to be installed higher than normal. A modified spacer is installed between the mid section and the stock 5" spacer, above the lower gear case, and is easy to install as no machining is necessary. Each Kit includes a modified 5" spacer, drive shaft, water pickup extension coupler, the pitot extension hose and fitting, the shifter extension coupler and all fasteners.

9" COMPETITION SEA STRAINER
Allows higher flows than standard size strainers for high performance applications and includes over-pressure relief and an intercooler port with filtered water supply. This strainer is furnished with #20 or #24 JIC ports for direct hookup to water hoses without need for adapter fittings and reducers.

STNR-8008     9" SEA STRAINER, #24 JIC PORTS
STNR-8009     9" SEA STRAINER, #20 JIC PORTS

15" COMPETITION SEA STRAINER
Allows ultra-high flows for high performance applications with two outlet ports for direct hookup to twin engines. It also includes over-pressure relief and an intercooler port with filtered water supply. This strainer is furnished with #20, #24 or #32 JIC ports for direct hookup to water hoses without need for adapter fittings and reducers.

STNR-8010     15" SEA STRAINER, #32 (IN), 2 x #24 (OUT) JIC PORTS
STNR-8011     15" SEA STRAINER, #20 JIC PORTS
STNR-8012     15" SEA STRAINER, #24 JIC PORTS
STNR-8013     15" SEA STRAINER, 1-1/2" (IN), 2 x 1-1/4" (OUT) PIPE PORTS

3" STAINLESS STEEL TILT COLUMN
Is a rugged steering column with adjustable tilt function and a sleek look. This column allows the driver to adjust the angle of the steering wheel to compensate for dashboard angle, the driver's height and personal preference.

COLM-8063     3" STAINLESS STEEL TILT COLUMN

6" STAINLESS STEEL TILT COLUMN
Is a rugged steering column with adjustable tilt function and a sleek look. This column allows the driver to adjust the angle of the steering wheel to compensate for dashboard angle, the driver's height and personal preference.

COLM-8066    6" STAINLESS STEEL TILT COLUMN

COLM-9053 QUICK RELEASE COLUMN
This design allows the entire column to be quickly removed, leaving just a low profile adapter that is permanently attached to the dash. The kit is also supplied with a quick release decorative cover to replace the column. This can be used for boat applications with two steering stations allowing easy transfer of the steering wheel and column from one station to the next. It can also be used on single steering station applications as a security measure.

PUMP-82XX LATHAM SEA PUMPS & MANIFOLDS
LATHAM SEA PUMPS & MANIFOLDS offer a wide variety of combinations to fit many applications. There are three different choices for pump constructions: aluminum bodies and end caps, stainless steel bodies with aluminum end caps, and stainless steel bodies with brass end caps. There are also many different manifold options from 1"NPT single manifolds up to 2"NPT triple manifolds, with everything else in between. Our pumps feature equal output flow from each port, and the inlet port can enter either the front or rear of the pump without reducing output flow to any of the ports. Another unique feature with our pumps are they will self prime at idle, which improves impeller longevity and pump performance.

KLFT-8851 LATHAM LINKAGE LIFT
LATHAM LINKAGE LIFT this hydraulic tender lift is designed to be installed on most cruiser applications. It is made of electro-polished 316 stainless steel and has unique features such as hydraulic cylinders with no external hydraulic lines and an integrated mechanical lock mechanism. The system is also provided with the adjustable Tender cradles and a safety bumper strip between the transom and platform. It has a gross weight capacity of 1600 lbs and a vertical stroke of 37". Custom transom brackets and support beams can be furnished upon request.

Mercury Mercruiser, Mercury Bravo and Mercury Verado are all registered trademarks of the Brunswick Corporation. Yamaha is a registered trademark of Yamaha Motor Corporation.

 

 
I
I
© Latham Marine Inc.
I