Skip to content

Inside Hardware

Sterndrive Full Power Hardware

THE FULL POWER KIT

THE FULL POWER KIT supplies all the main components inside the boat to complete a full hydraulic power steering system, except the steering pump, cooler and hoses. This kit can convert a MERC® ADD-ON KIT to full hydraulic, eliminating feedback to the wheel and backlash from steering cables. Included in the kit is a helm with integral shock and pressure relief valves, 3″ stainless mounting column with trim and sealing rings, remote reservoir tank, high pressure oil filter assembly, four special helm fittings, bolt-on cap for pump and installation instructions.

KFPR-1460

1 RAM FULL POWER INSIDE KIT

KFPR-1465

1 RAM FULL POWER INSIDE KIT, NO RESERVOIR *

KFPR-1403

1 RAM FULL PWR. INSDIE KIT, TILT COLUMN, NO RES.*

KPLT-7409

MCM BRAVO / STELLINGS PLATE - 8" RH

KFPR-1405

2 RAM FULL POWER INSIDE KIT, NO RESERVOIR *

KFPR-1404

2 RAM FULL PWR. INSIDE KIT, TILT COLUMN, NO RES. *

KFPR-1410

4 RAM FULL POWER INSIDE KIT

KFPR-1420

6 RAM FULL POWER INSIDE KIT

KFPR-1610

4 RAM 2 PUMP FULL POWER KIT

KFPR-1600

2 RAM 2 PUMP FULL POWER KIT

* Reservoir sold separately and is specific to the engine package.
MERC is a registered trademarks of the Brunswick Corporation

LATHAM MARINE RESERVOIR TANKS

LATHAM MARINE RESERVOIR TANKS are made with blue anodized aluminum ends and clear tubing for clear visibility of the system hydraulic oil. This aids in determining proper oil level and condition of the oil and can be used as a preventative maintenance tool. The reservoirs are matched specifically to the engine package as various engines are supplied with different pump configurations. Specify your engine package to your sales consultant to determine the right reservoir for your application.

KRSV-1000

EXTERNAL RESERVOIR TANK KIT, 500 EFI

KRSV-1100

EXTERNAL RESERVOIR TANK KIT, 496 EFI

KRSV-7805

EXTERNAL RESERVOIR TANK KIT, 525 EFI

KRSV-2000

EXTERNAL RESERVOIR TANK KIT, 575 SC

RESV-3930

EXTERNAL RESERVOIR TANK, 1/4" NPT (STD)

RESV-4010

EXTERNAL RESERVOIR TANK, DIFFUSED

CAPS-8103

FILTER CAP FOR MERCURY STEERING RESERVOIR

FILTERS

FILTERS are an integral part of any fluid system, whether it is hydraulic steering oil, fuel or engine oil. LATHAM HIGH PRESSURE FILTERS are designed for placement between the output side of the steering pump and the helm where it can catch particles before they enter the helm. This same housing also serves as a high performance fuel filter by using a different element.

FILT-8359

STEERING FILTER ASSEMBLY, 3/8" NPT PORTS

FILT-8360

STEERING FILTER REPLACEMENT ELEMENT

FILT-8362

STEERING FILTER ASSEMBLY, 1/2" NPT PORTS

FILT-8363

FUEL FILTER ASSEMBLY, 3/8" NPT PORTS

FILT-8361

FUEL FILTER REPLACEMENT ELEMENT

LATHAM STEERING COLUMNS

LATHAM STEERING COLUMNS are made with 316 stainless steel and with the heavy duty construction, they are built to last. Aluminum as well as stainless Tilt columns are also available. All the stainless columns are available in 3″ and 6″ versions. All columns include a stainless 3/4″ taper shaft which fits most steering wheel hubs.

COLM-3830

3" STANDARD COLUMN

COLM-3840

6" STEERING COLUMN can be ordered in place of the 3" column in full power kits, or as a separate piece

COLM-8063

3" TILT COLUMN ASSEMBLY, STAINLESS

COLM-8577

TILT COLUMN ASSEMBLY, ALUMINUM

COLM-8066

6" TILT COLUMN ASSEMBLY, STAINLESS

COLM-9053

QUICK RELEASE COLUMN this design allows the entire column to be quickly removed, leaving just a low profile adapter that is permanently attached to the dash. The kit is also supplied with a quick release decorative cover to replace the column. This can be used for boat applications with two steering stations allowing easy transfer of the steering wheel and column from one station to the next. It can also be used on single steering station applications as a security measure.

LATHAM FULL POWER HELMS

LATHAM FULL POWER HELMS are considered to be the best in the business. With smooth precise operation, drivers can turn the wheel and feel confident that they are in full control of their vessel. The built-in pressure relief guards against high pump pressure and the cross port shock reliefs protect the cylinder circuit from pressure spikes. Sterndrive and full power helms are available in various sizes ranging from 2 to 24 cubic inches per revolution. Larger helms along with ‘Load Sense’ helms are also available. Check with your sales consultant for available helms.

HELM-3713

LM4 FULL POWER HELM, W/ INT. VALVES

HELM-3711

LM6 FULL POWER HELM, W/ INT. VALVES

HELM-3714

LM7 FULL POWER HELM, W/ INT. VALVES

HELM-3710

LM10 FULL POWER HELM, W/ INT. VALVES

HELM-3712

LM12 FULL POWER HELM, W/ INT. VALVES

HELM-3715

LM14 FULL POWER HELM, W/ INT. VALVES

HELM-8713

LMD-4 ITS FULL POWER HELM, W/INT. VALVES

HELM-3716

LM19 FULL POWER HELM, W/ INT. VALVES

HELM-3718

LM24 FULL POWER HELM, W/ INT. VALVES

HELM-8714

LMD-7 ITS FULL POWER HELM, W/INT. VALVES

HELM-8710

LMD-10 ITS FULL POWER HELM, W/INT. VALVES

HELM-8712

LMD-12 ITS FULL POWER HELM, W/INT. VALVES

HELM TRIM KITS

HELM TRIM KITS are included in the Full Power Kits and can be purchased separately to finish out a Latham helm installation. They include the column ‘beauty ring’, sealing washer, studs, acorn nuts and helm adapter fittings.

KFIT-3810

HELM FITTINGS & TRIM KIT

HELM-3890

HELM TRIM KIT, NO FITTINGS

SPECIAL VALVES

SPECIAL VALVES can be used to switch from a single pump system to a twin pump or just to customize or update older systems.

VALV-1500

1/2" NPT(F) S.S. 3-WAY BALL VALVE - DUAL HELM

VALV-3175

030 VALVE allows two power steering pumps to be used in the steering system for added oil flow or redundancy.

VALV-5000

HELM VALVE contains a pressure relief to guard against high pump pressure, and a cross port shock relief to protect the cylinder circuit from pressure spikes. Fits most full power helms and LATHAM high volume helms.

Power Steering Pumps and Coolers

POWER STEERING PUMPS

POWER STEERING PUMPS provide pressure for power steering systems with inboard engines. Standard pump has 1/4″ female NPT connection on bolt-on pump cap for remote reservoir. High Volume pump has blue anodized aluminum case and pulley, 3/8″ NPT input ports and produces about 100% more flow. Both pumps have metric fasteners and metric threads in high pressure output port. Banjo hose end connects Aeroquip hose to output port, and the bolt-on pump cap provides connection for remote reservoir and is available with single and dual 1/4″ NPT ports.

PUMP-3190

STANDARD PUMP WITH PULLEY

PUMP-3192

STANDARD PUMP, NO PULLEY

PUMP-1573

HIGH VOLUME PUMP AND PULLEY

FITX-1090

METRIC BANJO HOSE END

PUMP-7268

BOLT-ON PUMP CAP ASSY, 1/4" NPT, BLACK ANOD.

PUMP-7269

BOLT-ON PUMP CAP ASSY,1/4" NPT, BLUE ANOD

PUMP-7270

BOLT-ON PUMP CAP ASSY, DUAL 1/4" NPT PORTS

CAPS-7836

BREATHER CAP FOR ELECTRIC STEERING PUMP

OIL COOLERS

OIL COOLERS are required in all steering systems with engine driven power steering pumps. Our standard coolers have 1″ NPT water and 3/8″ NPT female oil connections with a 2″ x 9″ tube bundle. Our high flow coolers have 2″ NPT water and 1/2″ NPT female oil connections with a 3″ x 6″ tube bundle. The tubes are made with cupro nickel.

COOL-1594

OIL COOLER, 2" X 9"

COOL-1187

OIL COOLER, 3" X 6"

OIL COOLER BRACKETS

OIL COOLER BRACKETS allow secure mounting of 2″ and 3″ diameter oil coolers of various lengths. Heavy duty black anodized aluminum bracket are sold individually; two required per cooler.

KMNT-3150

2" OIL COOLER MOUNT - EACH

KMNT-3160

3" OIL COOLER MOUNT - EACH

Steering Wheels and Adapters

TRIM WHEELS BY LATHAM put the world of performance steering technology at your fingertips! Now you don’t have to remove your hand from the wheel to operate the power trim. Three water resistance switches operate your power trim pumps, bringing your drives up and down together, while your stock trim panel operates the drives independently. Sealed dash housing eliminates dangling cords and wires. TRIM WHEELS are now available for LATHAM full hydraulic systems and most other hydraulic and cable systems. Please specify number of drives.

COMPETITION STEERING WHEELS

COMPETITION STEERING WHEELS have a durable foam grip over stainless steel rim and spokes for zero compass deflection and corrosion resistance. This wheel has been the standard of offshore racing for years.

STWL-1571

13" DIAMETER S.S. DEEP DISH WHEEL

STWL-3180

13" DIAMETER S.S. STD. DISH WHEEL, BLACK FOAM

STWL-3181

13" DIAMETER S.S. STD. DISH WHEEL, WHITE FOAM

STWL-3179

14.5" Diameter S.S. Std. Dish Wheel, Black Foam

STWL-3178

14.5" Diameter S.S. Std. Dish Wheel, White Foam

KSTW-1574

STEERING WHEEL KIT:14-1/2" S.S. Wheel,Cover Kit & HUB ADAPTER

LATHAM TRIM WHEELS

LATHAM TRIM WHEELS were designed for marine use with stainless steel spokes and rim. All three spokes are equidistant to make Trim Wheel switches easy to reach. Grip is made of durable black or white foam. These wheels are supplied with Latham Trim Columns specially designed to work with Latham Trim Wheels.

KSTW-7231

14.5" DIAM. S.S. TRIM WHEEL, BLACK, 3" COLUMN

KSTW-7236

14.5" DIAM. S.S. TRIM WHEEL, BLACK, 6" COLUMN

KSTW-7241

14.5" DIAM. S.S. TRIM WHEEL, WHITE, 3" COLUMN

KSTW-7246

14.5" DIAM. S.S. TRIM WHEEL, WHITE, 6" COLUMN

KSTW-8364

CAPILANO TRIM WHEEL - SS SPOKE

HUB ADAPTERS

HUB ADAPTERS are required to connect steering wheels to different styles of helms and columns, and cover kits conceal the nuts and bolts.

STWL-3860

HUB ADAPTER TO 3/4" TAPERED STANDARD SHAFT

STWL-3870

HUB ADAPTER TO MERC CABLE HELM

STWL-3810

HUB ADAPTER TO 3/4" TAPERED STANDARD SHAFT

STWL-3850

HUB COVER, LATHAM WHEELS

STWL-3800

STAINLESS STEEL COVER KIT

STWL-7007

HUB ADAPTER PUSH BUTTON QUICK RELEASE, STD

STWL-7015

HUB ADAPTER PUSH BUTTON QUICK RELEASE, 6 BOLT

Autopilot Valves

LATHAM MARINE’S AUTOPILOT VALVES will keep your fine motor-craft on course with the same precision and reliability as your LATHAM primary steering system. Our hydraulic Autopilot Valves interface with most popular electronic autopilots and are exclusively designed to operate with LATHAM FULL POWER STEERING SYSTEMS. We designed these valves from the ground up with all the necessary features, so there are no bulky extra blocks to add on. Simply connect your hydraulic hoses and autopilot electrical signal lines, and you will be cruising in style!

AUTOPILOT VALVES

AUTOPILOT VALVES are available for both sterndrive and outboard full power steering systems. These valves offer smooth responsiveness, with autopilot speed adjustment. The steering rams are locked when the autopilot valve is idle. They are equipped with a protective anodized billet aluminum body and are available in 12 or 24 VDC.

VALV-7275

AUTOPILOT VALVE, STERNDRIVE FULL POWER

VALV-7285

AUTOPILOT VALVE, OUTBOARD FULL POWER