Outboard Extension Kits

Mercury Verado® Spacer Kits

MERCURY VERADO SPACER KITS are designed to lower the propeller of a 30” shaft engine by 5″ by stacking stock spacers, allowing the transom bracket to be installed higher than normal. The Latham supplied spacer with a bearing support built in is installed between the mid-section and the stock lower spacer and is easy to install as no machining is necessary. Each Kit includes the modified 5″ spacer block, extended 35” drive shaft, water pickup extension coupler, the pitot extension hose and fitting, the shifter extension coupler, and all fasteners. A 30” donor shaft is required for each kit. Please call the Latham sales department to place an order and arrange to send your 30” donor drive shaft. Latham Marine can supply the 30” donor drive shaft if needed.
 
(*Photos are a generic representation – your kit may differ from photo)

KEXT-7958 MERCURY I-6 VERADO® 300/350/400R 5" SPACER KIT - BLACK

KEXT-7960 MERCURY I-6 VERADO® 300/350/400R 5" SPACER KIT - SILVER

KEXT-8000 MERCURY V8 VERADO® 225/250/300R 5" SPACER KIT - SILVER

KEXT-8001 MERCURY V8 VERADO® 225/250/300R 5" SPACER KIT - BLACK

KEXT-8450 MERCURY SC V8 VERADO® 450R 5" SPACER KIT - GRAY

KEXT-8451 MERCURY SC V8 VERADO® 450R 5" SPACER KIT - WHITE

Yamaha Outboard® Spacer Kits

YAMAHA OUTBOARD SPACER KITS are designed to lower the propeller of a 30” shaft engine by 5″ by stacking stock spacers, allowing the transom bracket to be installed higher than normal. The Latham supplied spacer with a bearing support built in is installed between the mid-section and the stock lower spacer and is easy to install as no machining is necessary. Each Kit includes the modified 5″ spacer block, extended 35” drive shaft, water pickup extension coupler, the pitot extension hose and fitting, the shifter extension coupler, and all fasteners. A 30” donor shaft is required for each kit. Please call the Latham sales department to place an order and arrange to send your 30” donor drive shaft. Latham Marine can supply the 30” donor drive shaft if needed.
 
(*Photos are a generic representation – your kit may differ from photo)

KEXT-8161 YAMAHA® 300 4.2L V6 5" SPACER KIT

KEXT-8165 YAMAHA® 350 5.3L V8 5" SPACER KIT

Suzuki DP V6 Outboard® Spacer Kits

SUZUKI DP V6 OUTBOARD SPACER KITS are designed to lower the propeller of a 30” shaft engine by 5″ by stacking stock spacers, allowing the transom bracket to be installed higher than normal. The Latham supplied spacer with a bearing support built in is installed between the mid-section and the stock lower spacer and is easy to install as no machining is necessary. Each Kit includes the modified 5″ spacer block, extended 35” drive shaft, water pickup extension coupler, the pitot extension hose and fitting, the shifter extension coupler, and all fasteners. No donor shaft is required for this extension kit. Please call the Latham sales department to place an order.
 
(*Photos are a generic representation – your kit may differ from photo)

KEXT-3500 SUZUKI® 350 DP V6 5" SPACER KIT - WHITE

KEXT-3501 SUZUKI® 350 DP V6 5" SPACER KIT - BLACK

Mercury Verado is a registered trademark of the Brunswick Corporation. Yamaha 4 STROKE is a registered trademark of the Yamaha Motor Corporation. Suzuki is a registered trademark of Suzuki Motor Corporation