Sea Strainers
Cooling System Components
LATHAM STANDARD SEA STRAINERS
LATHAM STANDARD SEA STRAINERS are installed in the water inlet line of each engine to filter out debris that could damage or clog cooling pumps and passages. LATHAM MARINE’s Standard Sea Strainer is designed and built for rough water abuse. The main body is cast from 316 stainless steel for superior strength and durability. Two inlet and two outlet ports are female 1″ NPT and mounting flange uses four 3/8″ bolts. The cover screws on, so you don’t have to worry about dropping or breaking wing nuts, and a clear, thick lens lets you visually check for debris. The cover is available in black or blue anodized and a variety of powder coat colors.
STNR-1503
SEA STRAINER - 1" NPT(F), BLACK COVER
STNR-1504
SEA STRAINER - 1" NPT(F), BLUE POWDER COAT COVER
9" Competition Sea Strainer
9" SEA STRAINER
9″ SEA STRAINER allows higher flows than standard size strainers for high performance applications and includes over-pressure relief and an intercooler port with filtered water supply. This strainer is furnished with #20 OR #24 JIC ports for direct hookup to water hoses without need for adapter fittings and reducers.
STNR-8008
9" SEA STRAINER, #24 JIC PORTS
STNR-8009
9" SEA STRAINER, #20 JIC PORTS
FILT-8008
SS MESH SCREEN/FILTER 3/4"NPTF - USED in 9" & 15" LM SEA STRAINERS
15" Competition Sea Strainer
15" SEA STRAINER
15″ SEA STRAINER allows ultra-high flows for high performance applications with two outlet ports for direct hookup to twin engines. It also includes over-pressure relief and an intercooler port with filtered water supply. This strainer is furnished with #20, #24 OR #32 JIC ports for direct hookup to water hoses without need for adapter fittings and reducers.
STNR-8010 15" SEA STRAINER, #32 (IN), 2 X #24 (OUT) JIC PORTS
STNR-8011 15" SEA STRAINER, #20 JIC PORTS
STNR-8012 15" SEA STRAINER, #24 JIC PORTS
STNR-8013 15" SEA STRAINER, 1-1/2" (IN), 2 X 1-1/4" (OUT) NPT PORTS
FILT-8008
SS MESH SCREEN/FILTER 3/4"NPTF - USED in LM 9" & 15" SEA STRAINERS